Diacetyl tastes of butter or butterscotch. It is perceived from about 0.1 mg/L (100 ppb), a very low threshold. In most beers, especially lagers and hoppy beers, it is a flaw: it masks the freshness of the hops. Here is how it forms, how to measure it and how to limit it.


Where does diacetyl come from?

During fermentation, yeast produces α-acetolactate (α-AL), an intermediate in the synthesis of valine. Part of it passes into the beer and slowly converts to diacetyl. The yeast must then reabsorb it and convert it into compounds with little aroma (acetoin, butane-2,3-diol). This is the “diacetyl rest”, which lengthens the time spent in the tank.

Diacetyl belongs to the family of vicinal diketones, or VDKs, which also includes pentane-2,3-dione. A bacterial contamination (Pediococcus, Lactobacillus) can also produce it, and no enzyme can correct this: hygiene remains the first line of defence.


How to measure it?

The forcing test, simple and quick:

  1. Take two 100 ml samples at the end of fermentation.
  2. Cover them. Leave the first at room temperature.
  3. Heat the second to about 65 °C for 20 minutes, then cool it to 20 °C.
  4. Taste: if the heated sample remains acceptable, the beer is ready.

Heating converts the remaining α-acetolactate into diacetyl, which reveals the beer’s potential. However, the result depends on the sensitivity of the tasters (cold, meal, tobacco, time of day). Gas chromatography (GC) is more reliable, but few breweries have access to it.


ALDC: removing the problem at the source

α-Acetolactate decarboxylase (ALDC) converts α-acetolactate directly into acetoin, without going through diacetyl (Godtfredsen & Ottesen, 1982). In practice:

  • less diacetyl formed;
  • shorter maturation, so tanks are freed up sooner;
  • a more consistent profile from one batch to the next.

Alpha Acetolactate Decarboxylase (1 kg) at Brewpark


Hop creep: the trap of hoppy beers

Hops contain enzymes capable of converting dextrins into fermentable sugars (Kirkpatrick & Shellhammer, 2018). After a dry hop, fermentation can therefore restart: the gravity drops further, the pressure rises and diacetyl can reappear, even in a beer that seemed mature.

To protect against it:


  • Measure the attenuation limit before fermenting. Fill a sterilised 750 ml Erlenmeyer flask with wort, overpitch with a heaped teaspoon of yeast, then keep it at around 20 °C, shaking regularly. Take the gravity every 24 h: the limit is reached when it remains stable for 48 h.
  • Check the gravity before packaging. A beer that is still dropping is not ready.
  • Do not rely on ALDC alone. It protects the beer, but does not replace dry hop monitoring or hygiene.

The result of the test can also be used to adjust the mashing to control the fermentability of the wort.


And Aromazyme?

It does not act on diacetyl, but it is also used in hoppy beers. Aromazyme is a preparation of β-glucosidases derived from Aspergillus niger. It releases monoterpene alcohols (linalool, geraniol…) bound to sugars in the hops, which enhances aromatic complexity.

According to the manufacturer’s technical data sheet:

  • the recommended dosage is 5 g/hL, to be diluted in water before adding;
  • the enzyme is added during fermentation, never after filtration;
  • it can slightly increase the fermentability of the wort.

This last point matters here: if you combine Aromazyme, intensive dry hopping and ALDC, monitor the final gravity and the diacetyl. The two enzymes do not replace each other. ALDC protects the beer’s profile, Aromazyme reveals the hop aroma.


Key takeaways

  • Diacetyl comes from the α-acetolactate excreted by yeast. ALDC prevents its formation, maturation eliminates it.
  • A dry hop can restart fermentation (hop creep) and diacetyl: check the gravity before packaging.
  • The forcing test is useful but subjective; GC remains the reference.
  • With Aromazyme, monitor the final gravity.


References

  • https://www.murphyandson.co.uk/aldc-for-those-about-to-hop/
  • Krogerus K., Gibson B.R. (2013). Diacetyl and its control during brewery fermentation. Journal of the Institute of Brewing, 119, 86-97.
  • Godtfredsen S.E., Ottesen M. (1982). Maturation of beer with α-acetolactate decarboxylase. Carlsberg Research Communications, 47, 93-102.
  • Kirkpatrick K.R., Shellhammer T.H. (2018). Evidence of dextrin hydrolyzing enzymes in Cascade hops. Journal of Agricultural and Food Chemistry, 66, 9121-9126.